
Project Overview
Christopher A., a homeowner in Snoqualmie Ridge near Azalea Park, found Oasis Bath Solutions through a website form fill. His shower wasn't old. The tile had been installed only a handful of years earlier and still looked clean on the surface, but water had already found its way behind it, causing real damage that wasn't visible until the wall came down.
That's exactly the risk grout-free wall systems are built to eliminate: a shower can look fine and still be failing underneath. Our crew tore the shower out to the ceiling, rebuilt the plumbing rough-in, and installed a custom Tyvarian shower base and wall panels as sealed, continuous sheets, no grout lines to fail again. The project also carried into the adjoining toilet nook and the home's laundry room, rounding out the update with new shelving, flooring, and a laundry utility sink. If you're considering a similar project, our Snoqualmie bathroom remodeling page has more on what a typical project in the area looks like.
The Challenge: A Newer Tile Shower, Already Leaking Behind the Wall
Why Even Recent Tile Can Fail
Christopher's shower wasn't the kind of dated, worn-out install we usually associate with a bathroom remodel. It was relatively new, and it still looked good on the surface. But tile depends on every grout line staying perfectly sealed for years at a time, and even a well-installed shower can start leaking long before it looks like it should. By the time Christopher noticed a problem, water had already reached behind the tile.
This is the exact scenario that shapes how Oasis Bath Solutions approaches water damage repair and replacement across every city we work in, not just older homes. A newer build date doesn't rule out hidden damage, it just means the damage hasn't had as long to spread yet.
Before and After
Master Bath: A Fully Custom Walk-In Shower & Soaking Tub
Master Bath: Updated Toilet Nook
Laundry Room
The Result
The finished bathroom addresses the exact problem that caused the original failure. Grout-free Tyvarian panels seal as one continuous piece, so there's no seam for water to work behind ever again. An 8-inch rain shower head with a handheld combo, mounted in black hardware, replaced the original fixtures, and a 72-inch custom glass enclosure finishes the shower off with a clean, modern look. A freestanding soaking tub sits just outside the shower, and new LVT flooring ties the whole room together.
The project extended beyond the shower itself. The toilet nook got new built-in shelving and matching flooring, small updates that make the space feel finished rather than left over from the old layout. In the laundry room, a new utility sink and updated flooring rounded out the project, giving the space real function alongside the washer and dryer rather than just open counter space.
Full scope of work:
Tile tear-out to the ceiling
Plumbing rough-in
Go Board waterproofing system
Custom Tyvarian shower base and wall panels, with corner shelf
8" rain shower and handheld combo, brushed hardware
72" custom glass enclosure
Freestanding soaking tub
Medium drywall repair
New LVT flooring
Paint
Toilet nook refresh with new shelving and flooring
Laundry room update with new utility sink and flooring
The full project was completed in 12 days.
Benefits
Results of This Snoqualmie Ridge Master Bathroom Remodel
No More Hidden Water Damage
Grout-free Tyvarian panels seal as one continuous piece, so there's no seam left for water to find its way behind the wall again.
A Custom Fit, Not a Standard Box
The shower base and glass enclosure were built around Christopher's actual space, not a stock size.
A Spa-Style Daily Routine
The rain shower and handheld combo, paired with a separate freestanding tub, turn an everyday routine into something closer to a retreat.
Properly Waterproofed, Start to Finish
A dedicated waterproofing system and full plumbing rough-in address the root cause of the original failure, not just the surface.
Fast Turnaround
The full tear-out and rebuild was completed in 12 days.
Is a Grout-Free Shower Remodel Right for Your Snoqualmie Ridge Home?
A full bathroom remodel like this makes sense for a specific set of situations. This may be a good fit if:
Your shower looks fine but something feels off, like soft spots, discoloration, or a musty smell.
You have a newer home and assumed hidden water damage wasn't a risk yet.
You want a shower and freestanding tub as separate fixtures, not a combined unit.
You're not interested in tile or grout lines that can fail again the same way.
You want proper waterproofing and permitted work, not a quick surface-level fix.
You want the whole project done in under two weeks.
Why Snoqualmie Homeowners Choose Oasis
Oasis Bath Solutions has built a reputation across Snoqualmie Ridge for catching problems that aren't visible on the surface, whether that's aging tile or, as with Christopher's project, tile that's barely a few years old. Master Craftsmen complete every installation with proper waterproofing and permitted work, backed by a Lifetime Warranty.
What Did This Project Cost?
Christopher's remodel came in at $36,500, reflecting the full tile tear-out, plumbing rough-in, custom Tyvarian shower, freestanding tub, and new flooring. Most Snoqualmie full bathroom remodels like this fall in our Premium tier, $12,500–$20,000+, with larger builds like this one, which included a full tear-out and separate tub installation, running higher. See full pricing and cost guide
Explore More Bathroom Remodeling Near Renton
Ready to plan your own Snoqualmie bathroom project?
Get a free, in-home consultation and a firm price before any work begins.
Bathroom Remodeling for Snoqualmie and the Surrounding Area
This project was completed in Snoqualmie Ridge, near Azalea Park, and is a strong example of the type of grout-free master bathroom remodel many Snoqualmie homeowners are looking for, especially those surprised to find hidden damage behind newer tile.
Oasis Bath Solutions serves homeowners throughout Snoqualmie, including Snoqualmie Ridge and Historic Snoqualmie, as well as North Bend and Carnation.
If you are planning a similar project, explore our Snoqualmie bathroom remodeling services or see how we help homeowners with full bathroom remodels and Bellevue bathroom remodeling.
Project Location: Snoqualmie Ridge, Snoqualmie WA
FAQs
How much did this remodel cost?
This project cost $36,500 and included a full tile tear-out, plumbing rough-in, custom Tyvarian shower, freestanding tub, and new flooring.
How long did the project take?
12 days, start to finish.
How can a newer tile shower already have water damage?
Grout lines can fail within just a few years, long before a shower looks worn on the surface. By the time it's visible, water has often already reached the wall behind the tile.
Does Oasis Bath Solutions install tile?
No. Oasis Bath Solutions uses grout-free wall systems like Tyvarian and Sentrel, which seal as continuous panels instead of individual tiles.
What is Go Board?
Go Board is a waterproofing substrate installed behind the wall panels, providing a sealed barrier against water intrusion before the finish surface goes on.
Does Oasis Bath Solutions offer a warranty on custom shower remodels?
Yes, every Oasis Bath Solutions project includes a lifetime warranty on materials and labor.
This project was completed in our Snoqualmie service area
Explore Bathroom Remodeling Services Near Snoqualmie

Renton
Our Renton bathroom remodeling team serves homeowners throughout the city including Maplewood Heights, Kennydale, Talbot Hill, the Highlands, Fairwood, and Benson Hill.

Puyallup
Our Puyallup bathroom remodeling team serves homeowners throughout the city including South Hill, Summit, downtown Puyallup, Sumner, Fife, and Bonney Lake.

Federal Way
Our Federal Way bathroom remodeling team serves homeowners throughout the city including Twin Lakes, Lakeland, Redondo, and Dash Point, and homes near Brigadoon Elementary and West Hylebos Creek.




